efriedrich
Well-Known Member
- Joined
- Mar 9, 2011
- Messages
- 725
- Reaction score
- 42
It just keeps getting better Eric.
Cleaned out my garage to make room for another car
- Thread starter bremereric
- Start date
jasperjacko
Well-Known Member
- Joined
- Dec 4, 2011
- Messages
- 1,672
- Reaction score
- 251
Indeed!
roadrunnerman
Well-Known Member
I thought you were done with the car, but you keep finding little things to make the car look even better.
bremereric
FMJ Body Moderator
Still got new 4 speed carpet and rear sway bar to do.
bremereric
FMJ Body Moderator
One more little project completed.
Okay first of all I visited my M-Body at the storage and the M-Body battery strut is the same. So next time I go junk yarding I see if I can snag a few.
On a previous junk yard visit I got this and painted it this weekend.
Then I did paint the battery strut rod but did it in white instead of black. It contrasts good against the black of the wiring harness and air intake hose. I also placed it underneath the brace instead of on top of the brace. This would have wrecked the white paint underneath the bolt.
Okay first of all I visited my M-Body at the storage and the M-Body battery strut is the same. So next time I go junk yarding I see if I can snag a few.
On a previous junk yard visit I got this and painted it this weekend.
Then I did paint the battery strut rod but did it in white instead of black. It contrasts good against the black of the wiring harness and air intake hose. I also placed it underneath the brace instead of on top of the brace. This would have wrecked the white paint underneath the bolt.
Jack Meoff
Mopar Maniac
Wow!
That's like the Holy Grail of pristine engine bay's.
Beautiful!
That's like the Holy Grail of pristine engine bay's.
Beautiful!
bremereric
FMJ Body Moderator
It's so white the camera doesn't even need to flash.
Jack Meoff
Mopar Maniac
Last edited:
bremereric
FMJ Body Moderator
Rear sway bar done
I got it installed but won't do it shame with anymore nightime photos. I had to shim the bottom of the Firm Feel brackets with one inside washer on the outer bottom and two inside washers on the inside bottom. I did it by myself and scratched it a little. No harm cause you can only see some of the gray powder coating underneath. So hear goes some moring pics and will drive it on Saturday in 72 degree weather. :icon_cheers:
I got it installed but won't do it shame with anymore nightime photos. I had to shim the bottom of the Firm Feel brackets with one inside washer on the outer bottom and two inside washers on the inside bottom. I did it by myself and scratched it a little. No harm cause you can only see some of the gray powder coating underneath. So hear goes some moring pics and will drive it on Saturday in 72 degree weather. :icon_cheers:
bremereric
FMJ Body Moderator
Had a issue with the stock exhaust manifold gasket. I finally took the time to replace it. I used a little high temp silicone at the problem area this time.
Jack Meoff
Mopar Maniac
Wow!
Looks killer!!!
Looks killer!!!
