gporeilly
Well-Known Member
Hey guys & Gals I need your help to solve a small but frustrating problem. The cluster lights seem a bit dim even when turned up to the highest so I am just trying to update/change the bulbs in the main cluster on my 1988 Fifth to see if replacements will make a difference. I have the original service manual and no problem to remove the cluster bezel. Also a breeze to remove the top cover and trim pad to replace the front speakers at the same time.
My snag is removing the cluster assembly itself to access the bulbs. The manual says to remove the three {3} screws attaching cluster and printed circuit board assembly to the carrier frame. I can clearly see and remove the top left screw and the bottom right screw holding the cluster assembly... but for the life of me I can't seem to locate that elusive 3rd screw to release the assembly completely ???
Any insight would be greatly appreciated.
Regards,
Garrett
My snag is removing the cluster assembly itself to access the bulbs. The manual says to remove the three {3} screws attaching cluster and printed circuit board assembly to the carrier frame. I can clearly see and remove the top left screw and the bottom right screw holding the cluster assembly... but for the life of me I can't seem to locate that elusive 3rd screw to release the assembly completely ???
Any insight would be greatly appreciated.
Regards,
Garrett